Odorless mineral spirits are hydrotreated light petroleum distillates shipped under UN1268 or NA1993, Class 3 or combustible liquid, Packing Group III, depending on flash point. That single number on the safety data sheet decides whether the load is fully regulated hazmat or a combustible liquid that qualifies for broad exceptions in non-bulk packaging. Get it right before the load is tendered and the rest of the shipment falls into place: the right tank, the right driver, the right paperwork.
What Are Odorless Mineral Spirits
Odorless mineral spirits, often sold as OMS, low-odor solvent or hydrotreated light distillate, are a petroleum solvent produced by hydrotreating a straight-run distillate cut. Hydrotreating saturates and removes most of the aromatic hydrocarbons, which are the compounds responsible for the sharp smell of conventional mineral spirits and paint thinner. What comes out is a clear, water-white liquid with a faint odor, used as a thinner and cleanup solvent in coatings, as a carrier in printing inks and adhesives, as a degreaser in metal finishing, and as a diluent across a long list of industrial formulations.
Chemically, OMS and regular mineral spirits are close cousins. Both are hydrocarbon mixtures in roughly the same boiling range, and both move under the same part of the Hazardous Materials Table in 49 CFR 172.101. The lower aromatic content changes the toxicity profile and the smell. It does not change the fact that the material burns, holds a static charge and has to be carried in equipment built for petroleum distillates. Shippers who treat OMS as a mild cleaning product because it does not smell like one are the shippers who get stopped at a scale house. For bulk and packaged moves of this product family, our liquid bulk and chemical logistics team works from the SDS first and the purchase order second.
UN1268 vs NA1993: Classification and Flash Point
Petroleum distillates and hydrotreated light distillates appear in the Hazardous Materials Table at 49 CFR 172.101 under UN1268 as a Class 3 flammable liquid, Packing Group III for most mineral spirits grades. The same chemical family also appears as NA1993, combustible liquid, when the flash point puts it above the flammable threshold. Two proper shipping names, two sets of consequences, one test result deciding between them.
Flash Point and Packing Group III
Under 49 CFR 173.120, a flammable liquid is one with a flash point below 141 degrees F (60.5 degrees C). Material with a flash point at or above 141 degrees F and at or below 200 degrees F is classed in the United States as a combustible liquid. Many OMS grades sit close to that line, which is why two drums from two suppliers with the same trade description can carry different shipping names. Packing Group III applies to the mineral spirits grades at the low-hazard end of Class 3, which sets the packaging performance standard and the quantity thresholds that follow from it.
When It Ships as Combustible, Not Hazmat
Combustible liquids in non-bulk packaging are generally excepted from most of the hazardous materials requirements under 49 CFR 173.150(f). Drums and totes of NA1993 OMS moving domestically by highway often ride with no placards, no hazmat shipping papers and no endorsement on the driver's license. Bulk shipments are a different matter and retain requirements that non-bulk packagings do not. Confirm the flash point on the current SDS for the specific grade and lot, not on a generic product page.
Tanker and Packaging Equipment for Odorless Mineral Spirits
Equipment follows volume first and classification second. A plant taking regular bulk deliveries buys differently than a formulator pulling a few drums a month, and the packaging decision moves cost more than the lane does.
Bulk Tank Trucks
Highway bulk moves of petroleum distillates commonly run in MC 306 and DOT 406 non-pressure cargo tanks built to the specification in 49 CFR 178.346. These are the aluminum and stainless tanks you see at terminal racks, designed for low-pressure liquid service with bottom loading and vapor recovery connections. Grounding and bonding points, internal shutoff valves and emergency discharge controls are part of the specification, not accessories ordered on top of it.
ISO Tanks and Totes
Export and import volumes move in ISO tanks, which give the shipper one sealed vessel from the loading plant to the overseas consignee with no transloading and no exposure to a second tank's residue. For mid-size domestic volumes, intermediate bulk containers are the usual answer, and they ride on standard dry vans without tank equipment or a tank-qualified driver.
Drums
Steel drums remain the default for small-quantity OMS, especially for distributors supplying coatings and ink shops. Packing Group III performance packaging, a correctly closed drum and an accurate bill of lading are the whole compliance story on a non-bulk combustible liquid shipment.
| Packaging | Typical use | Classification impact |
|---|---|---|
| DOT 406 / MC 306 tank truck | Bulk domestic highway moves to plants and terminals | Bulk rules apply to both UN1268 and NA1993 |
| ISO tank | International and terminal-to-plant moves of full loads | Bulk rules plus IMDG requirements for UN1268 ocean legs |
| IBC tote | Mid-volume plant supply on dry vans | Non-bulk for most grades; NA1993 excepted under 173.150(f) |
| Steel drum | Distributor and formulator quantities | Non-bulk PG III packaging; combustible exception commonly applies |
Loading, Compatibility, and Placarding Rules
Loading is the phase where petroleum solvent shipments go wrong. OMS is a low-conductivity hydrocarbon, which means it accumulates static charge during transfer, and a charged liquid falling into a tank with a flammable vapor space is the classic ignition scenario. Bottom loading through a dry-break coupling cuts splash and turbulence, keeps vapor contained and is standard practice at terminal racks. Top loading, when it is the only option, calls for a drop tube that reaches the bottom of the compartment and a reduced fill rate at the start. Bonding cables go on before the first drop moves and come off after the last.
Placarding follows the classification. A bulk tank of UN1268 carries FLAMMABLE placards and the identification number, and the driver needs a hazmat endorsement. A non-bulk NA1993 shipment under the 173.150(f) exception generally carries no placards and no hazmat shipping paper, though the bill of lading should still describe the material accurately so the receiver and any enforcement officer can tell what is on board.
Compatibility is the third piece. Petroleum distillates pick up whatever the previous cargo left behind, and a tank that last carried a glycol, an amine or a vegetable oil will put haze, color or odor into a water-white solvent. Odor is the entire value proposition of OMS. Ask for the previous cargoes and the wash certificate before the tank arrives, not after. Fill method and rack practice are covered in detail in our comparison of bottom loading versus top loading tankers.
Common Shipping Mistakes with OMS and Similar Petroleum Solvents
The same handful of errors account for most rejected loads, roadside holds and contaminated deliveries in this product family.
- Copying the shipping name from an old BOL. Suppliers reformulate and flash points shift between grades, so a document that said NA1993 last year may need to say UN1268 today.
- Assuming odorless means non-hazardous. Hydrotreating removes aromatics and smell, not flammability, and the Hazardous Materials Table does not care how the product smells.
- Skipping the previous-cargo check. Residue from an incompatible load can discolor or contaminate a full tank of solvent, and the claim is worth more than the freight.
- Sending an incomplete SDS to the carrier. Dispatch needs the flash point, UN or NA number, packing group and emergency contact before a driver is assigned, not when the truck is under the rack.
- Using a non-hazmat driver on a bulk UN1268 load. The endorsement requirement attaches to the classification and the quantity, and finding out at the scale house costs a day.
- Treating bulk combustible shipments as exempt. The exception in 49 CFR 173.150(f) is written for non-bulk packaging, so bulk tanks of NA1993 keep requirements that drums do not.
Each of these is caught by one conversation at tender time. The shipper who sends the SDS, the volume, the packaging and the delivery window in the first message gets equipment matched the same day.
Typical Lanes and Carrier Considerations
OMS originates at refining and blending points and moves to coatings, ink, adhesive and metal finishing plants, with imported volume arriving in ISO tanks and drums for inland distribution. Whatever the lane, the carrier question is the same: does this fleet run petroleum distillates as regular work, and can it document what was in the tank before yours.
What to confirm before you tender:
- Equipment specification. DOT 406 or MC 306 tanks per 49 CFR 178.346 for bulk highway service, with current inspection and test records on file.
- Driver credentials. A hazmat endorsement where UN1268 quantities require it, plus TWIC if the load touches a secured marine terminal.
- Wash history. A wash certificate and the preceding cargoes, in writing, for any tank carrying a water-white solvent.
- Insurance and authority. Total Connection carries $5M in general liability, holds FMC OTI/NVOCC license 026203NF and FMCSA MC 280101, and vets carriers against that standard before they haul.
Most OMS programs do not stop at the tank truck. The same team handles the drayage off the terminal, the ocean or air leg on imported drums, the customs entry, the warehousing between production and the plant's pull schedule, and the LTL that moves the remainder. One forwarder across all of it means one set of documents and one phone number when a delivery window moves.
Get Your Odorless Mineral Spirits Shipment Covered
Shipping odorless mineral spirits well comes down to three decisions made in order. Read the flash point off the current SDS and classify the material as UN1268 flammable or NA1993 combustible, Packing Group III. Pick the packaging that fits the volume, from DOT 406 tank trucks and ISO tanks down to totes and drums. Then confirm the tank's previous cargo and wash status so a water-white solvent stays water-white at the receiver. Everything else, placards, endorsements, shipping papers, follows from those three.
If you move OMS, conventional mineral spirits or any other petroleum distillate, send us the SDS, the volume per shipment and the delivery points, and we will match equipment and vetted carriers to it. Start with our liquid bulk and chemical logistics page for how we run tank programs, read the complete guide to liquid bulk freight for the wider equipment picture, and review our breakdown of hazmat trucking regulations before your next Class 3 tender. When you are ready to move the load, request a liquid bulk quote and a named person on our team will come back with equipment, transit and a price.
Is odorless mineral spirits a hazmat?
Classification depends on the flash point listed on the safety data sheet for that grade. Below 141 degrees F the material ships as UN1268, Class 3 flammable liquid, Packing Group III, with hazmat shipping papers, placarding on bulk loads and an endorsed driver. At or above 141 degrees F it ships as NA1993 combustible liquid, and non-bulk packagings are largely excepted under 49 CFR 173.150(f).
What is the difference between odorless mineral spirits and regular mineral spirits?
Odorless mineral spirits are hydrotreated to remove most of the aromatic hydrocarbons that give conventional mineral spirits and paint thinner their smell. Both are petroleum distillates in a similar boiling range and both ship under the same entries in the Hazardous Materials Table at 49 CFR 172.101. The lower aromatic content changes odor and toxicity profile, not flammability.
What tanker type is used for odorless mineral spirits?
Bulk highway moves run in MC 306 and DOT 406 non-pressure cargo tanks built to the specification in 49 CFR 178.346. International full loads move in ISO tanks so the product stays in one sealed vessel from plant to consignee. Smaller volumes go in IBC totes or steel drums on standard dry vans.
Does odorless mineral spirits require a hazmat endorsement to drive?
The endorsement requirement follows the classification and the quantity being carried. Bulk loads shipped as UN1268 flammable liquid in placarded quantities require a driver with a hazmat endorsement. Non-bulk NA1993 combustible liquid shipments moving under the exception in 49 CFR 173.150(f) generally do not trigger it.
Can odorless mineral spirits be shipped in the same tanker as other chemicals?
Sharing equipment works only when the previous cargo is compatible and the tank has been washed to a documented standard. Residue from glycols, amines, vegetable oils or pigmented products can discolor or contaminate a water-white solvent and ruin the load. Ask the carrier for the wash certificate and the preceding cargoes before the tank is dispatched.





